Next up from the 'must do better' list is Italari’s very old M4A1 Sherman. The kit is OOB except an RB Models Browning MG barrel and Dragon DS tracks (taken from the Dragon El Alamein Sherman kit).
As you can see the model is oh-so-very-nearly complete. There is some minor detail painting left to do, fix on the broken idler wheel, fix the tracks and then lightly weather. The issue is that I think I trimmed the tracks for some reason and they are now a bit short, and I expect that is why the build stalled. Anyway, we're here to work past that, so onwards!
First task was to fix the broken wheel. As there was a lot of paint in the area I used a superglue gel
While this was drying I found a piece of board which may be used as a base if there are issues with the tracks. If I use this then it would be mostly a simple scenic base as a test for my static grass dispenser rather than anything more adventurous
M4A1 Sherman
-
- Posts: 229
- Joined: 17 Sep 2014, 18:04
- Location: Reading, UK
- Contact:
M4A1 Sherman
My sedentary pursuits http://www.outerarm.co.uk
-
- Posts: 229
- Joined: 17 Sep 2014, 18:04
- Location: Reading, UK
- Contact:
Re: M4A1 Sherman
Next step was to fix the tracks and, as I suspected, there are some gaps. The left hand side isn't that bad, but there is a larger gap on the right
The first gap is about half a pad, while the second is a pad and a half. I'm thinking of using some sheet styrene as a custom sized pad and spare Bronco guide horns. With some mud and grass around the areas, and suitably placed figures, should hide the issue! I hope to get the new liks added and painted in the next few days and will then provide an update. I'll probably also start working on the base a bit as well.
The first gap is about half a pad, while the second is a pad and a half. I'm thinking of using some sheet styrene as a custom sized pad and spare Bronco guide horns. With some mud and grass around the areas, and suitably placed figures, should hide the issue! I hope to get the new liks added and painted in the next few days and will then provide an update. I'll probably also start working on the base a bit as well.
My sedentary pursuits http://www.outerarm.co.uk
- Philipp Gross
- Site Admin/Founder
- Posts: 5122
- Joined: 19 Jul 2014, 23:40
- Location: Frankfurt
- Contact:
Re: M4A1 Sherman
Nice looking Sherman Ian!
A pity about the tracks, but it sounds like you have a good solution at hand.
Philipp
A pity about the tracks, but it sounds like you have a good solution at hand.
Philipp
Completed Campaigns:
- Rob Matthews
- Moderator
- Posts: 1202
- Joined: 20 Jul 2014, 00:06
- Location: Wiltshire UK
- Contact:
Re: M4A1 Sherman
Bet that will fix up nicely.
A static grass dispenser Eh? Is that the Noch? Worth the money - I'm interested in what you think? Shawn has one - they are just so hideously expensive
Rob
A static grass dispenser Eh? Is that the Noch? Worth the money - I'm interested in what you think? Shawn has one - they are just so hideously expensive
Rob
Modelling the mundane
Completed Campaigns:
Completed Campaigns:
- Vlad Seabrook-Smith
- Posts: 615
- Joined: 19 Jul 2014, 22:57
- Gary Boxall
- Site Admin/Founder
- Posts: 2476
- Joined: 18 Jul 2014, 21:34
- Location: Auckland New Zealand
Re: M4A1 Sherman
Is it worth trying to adjust the idler wheel to sort out the track conundrum?
Gary
Gary
Hi. My name is Gary and I'm an ex-Shermaholic....
- Shawn Ramsey
- Senior Site Contributor.....
- Posts: 1987
- Joined: 20 Jul 2014, 00:26
Re: M4A1 Sherman
Not as much as all that stuff I got from MigRob Matthews wrote:Bet that will fix up nicely.
A static grass dispenser Eh? Is that the Noch? Worth the money - I'm interested in what you think? Shawn has one - they are just so hideously expensive
Rob
You have mentioned this before but I never can figure out how you do that. The ones I have build have one postion they go into. No adjustments allowed. Every tracked vehicle I have build I always have problems with the tracks not fitting.Gary Boxall wrote:Is it worth trying to adjust the idler wheel to sort out the track conundrum?
Gary
Now back to the topic. Nice work Ian.
Shawn
Completed Campaigns: