Page 1 of 7
Sd.Kfz 222
Posted: 10 May 2016, 10:28
by Adam Durrant
Armoured car group build seams like a good one to cut my teeth on. Have the Tamiya Sd.Kfz 222 in my stash, bought it as a "filler" on an order from Hannants (damn them telling you how much space you have left in your order before your shipping cost goes up!).
Research suggests the kit is still the 1975 kit, reboxed in 2003 with some pretty average photoetch thrown in for the grenade screens. The gun barrel is very nice. Ordered photoetch set from Eduard and resin storage set from Legend. Therefore, for the first time I'm going to attempt to,
A) work with resin
B) paint a figure
C) put it all in a vignette
Wish me luck!
Re: Sd.Kfz 222
Posted: 10 May 2016, 11:14
by Philipp Gross
Good luck!
The Tamiya kit is old but it should still look perfectly fine in the end, especially with all the extras you have planned. Trying something new can be daunting, I speak from experience
Don't hesitate to ask if you feel unsure about anything
Looking forward to see it built!
Philipp
Re: Sd.Kfz 222
Posted: 10 May 2016, 14:18
by Ian Shumsky
It is a nice little kit -- enjoy!
Re: Sd.Kfz 222
Posted: 10 May 2016, 15:16
by Raoul Kunz
Nice project Adam!
Especially with Legend stowage and some minor Eduard etch (which I love for it's
uncomplicated nature) it should turn out awesome
!
I'd advice a RB barrel, though I have to admit I don't know the Tamiya kit, could have a perfectly nice barrel and you can always get a lot from the kit parts with great painting, so...nothing obligatory, just nice to have those, especially given the fact that they come relatively cheap
.
Best regards
Raoul G. Kunz
Re: Sd.Kfz 222
Posted: 10 May 2016, 15:27
by Steve Hutchinson
Nice starter Adam
The Eduard can be a little tricky at times, it helps to scrape or file off the silver coating on the glue surface to give the super glue a chance
Surprisingly it will fight being superglued more often than not, I think the silver coating is a derivative of krytonite
The stowage looks cracking
A figure too, good for you Adam
Look forward to seeing it all come together
Steve H
Re: Sd.Kfz 222
Posted: 10 May 2016, 21:28
by Adam Durrant
Thanks guys, as Raoul said, I went for the Eduard as not quite as fiddly as the Aber sets. I've found the Eduard sets good for aircraft especially the preprinted cockpit sets. Gary has given me some soldering advice so keen to crack into that. Got myself a fiberglass pen so will scratch up the back of the PE before glueing.
Resin, two part epoxy to secure or superglue? Only ever used Brassin sets for aircraft wheels and they stick well with superglue.
Got a brass MG42 barrel coming as well as the kit one is pretty average.
Anyone know what the row of canisters/bottles are on the front fender? They are in pics but can't work out what they are.
Re: Sd.Kfz 222
Posted: 10 May 2016, 21:55
by Raoul Kunz
Anyone know what the row of canisters/bottles are on the front fender? They are in pics but can't work out what they are.
Those are Czech-made smoke emitters added after the "conquest" of Czechoslovakia since the Czech armaments industry had a
lot to offer to the Wehrmacht of '38, not the least a fully tested, high quality tank in the LT vz. 38 (the 38 (t) ).
Sounds crazy for such a small country but remember that it had been until recently (in historical concepts of time that is) the chief arsenal of the K.u.K. empire
.
Best regards
Raoul G. Kunz
Re: Sd.Kfz 222
Posted: 10 May 2016, 22:16
by Adam Durrant
Thanks Raoul, thought they might be something like that!
As it is they will be left off as the jerry can rack in the ledgend set is very nice and will go there instead.
Re: Sd.Kfz 222
Posted: 10 May 2016, 22:21
by Philipp Gross
Adam Durrant wrote:Thanks guys, as Raoul said, I went for the Eduard as not quite as fiddly as the Aber sets. I've found the Eduard sets good for aircraft especially the preprinted cockpit sets. Gary has given me some soldering advice so keen to crack into that. Got myself a fiberglass pen so will scratch up the back of the PE before glueing.
Resin, two part epoxy to secure or superglue? Only ever used Brassin sets for aircraft wheels and they stick well with superglue.
I'm always happy to use Eduard as well, especially since I'm still terrified of soldering (or rather, setting the house on fire
while soldering....).
As for resin...superglue will do just fine
Philipp
Re: Sd.Kfz 222
Posted: 12 May 2016, 00:02
by Shawn Ramsey
Adam- Looking forward to see your build. I built the Afrika-Korps one that had the Motorcycle and figures. It was a fun build.
If you have any questions about painting the figures let me know.
Shawn